MOT Status
ExpiredMileage
105,492 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Axle deformed but serviceable rear axle corroded around bushes (5.1.1 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear most bush delaminating from arm (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Offside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill front centre and rear (7.1.1 (a) (i))
Indicator switch faulty (4.4.2 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Macpherson strut corroded and seriously weakened front o/s MacPherson strut corroded (5.3.3 (b) (i))
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear o/s inner sill corroded (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear o/s subframe mounting corroded (6.2.2 (d) (i))
Front Headlamp has a product on the lens but not seriously reducing light output front both n/s o/s outer headlights misty (4.1.4 (b))
oil leak
Offside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Mounting point (5.3.6 (a) (i))
Indicator switch faulty (4.4.2 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Offside Headlamp aim too low (4.1.2 (a))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light Lamp unit (4.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light Lamp unit (4.3.1 (b) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Emissions not tested Excessive exhaust blow (8.2.1.2 (d))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Headlamp aim too high (4.1.2 (a))
Offside Headlamp aim too high (4.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge Worn on outer edges (5.2.3 (e))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge Worn on outer edges (5.2.3 (e))
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front inner edge
Nearside Rear Body has slight corrosion (6.1.B.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front inner edge
Offside Rear Body has slight corrosion (6.1.B.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Brake pipe slightly corroded both rear to brake hoses (3.6.B.2c)
Brake pipe slightly corroded Both front to rear (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Hazard warning lamps inoperative (1.4.B.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
front brake discs corroded
Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL08 UKN is a 2008 Toyota Aygo in Red with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SL08 UKN, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SL08 UKN?
You can check the full history of SL08 UKN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL08 UKN registered?
SL08 UKN is a 2008 Toyota Aygo, first registered on 31 March 2008.
Is SL08 UKN safe to buy?
The MOT history for SL08 UKN shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL08 UKN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL08 UKN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.