2010 Nissan Micra

Offside Rear Fuel tank exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

front exhaust joint deteriorated

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Sub-frame pin or bush worn but not resulting in excessive movement Front sub-frame rear bushes (5.3.4 (a) (i))

Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Side repeater lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Sub-frame pin or bush worn but not resulting in excessive movement Front sub-frame rear bushes (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 36% (1.2.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 31% (1.2.1 (b) (i))

Central Rear Brake hose ferrule excessively corroded Both (1.1.12 (f) (i))

Central Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 36% (1.2.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 31% (1.2.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Emissions not tested exhaust leak (8.2.1.2 (d))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front brake hose unclipped

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Fuel pipe damaged fuel filler neck (6.1.3 (c) (ii))

Rear exhaust clamp missing but exhaust still secure