MOT Status
ValidMileage
120,814 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Seat belt buckle missing (7.1.2 (d))
Offside Headlamp aim too high (4.1.2 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Reversing lamp inoperative (4.6.1 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm 195/65R15T (5.2.3 (e)) DANGEROUS
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Inner Sill Area (6.1.1 (c) (i))
Nearside Rear Outer Tyre slightly damaged/cracking or perishing Cracking On Sidewall (5.2.3 (d) (ii))
Offside Front Outer Tyre slightly damaged/cracking or perishing Cracking On Sidewall (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear Bushing (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing Cracking On Tread (5.2.3 (d) (ii))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Inner Sill Area (6.1.1 (c) (i))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Emissions unable to be completed (8.2.2.2 (e))
Nearside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Inner Sill Area (6.1.1 (c) (i))
Nearside Rear Outer Tyre slightly damaged/cracking or perishing Cracking On Sidewall (5.2.3 (d) (ii))
Offside Front Outer Tyre slightly damaged/cracking or perishing Cracking On Sidewall (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear Bushing (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing Cracking On Tread (5.2.3 (d) (ii))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Inner Sill Area (6.1.1 (c) (i))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Fuel filler neck corroded
Fuel tank strap corroded
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill area (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill area (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn possible full arm (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear rear anti row bar bushes
underside corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Engine management light indicates fault.
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Engine management light indicates fault.
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Front Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL12 BLJ is a 2012 Mazda 3 in Black with a 1,560cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2012 Mazda 3 models, the average MOT pass rate is 80.6% with a typical mileage of 61,274 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying SL12 BLJ, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 14 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SL12 BLJ?
You can check the full history of SL12 BLJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL12 BLJ registered?
SL12 BLJ is a 2012 Mazda 3, first registered on 13 March 2012.
Is SL12 BLJ safe to buy?
The MOT history for SL12 BLJ shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL12 BLJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL12 BLJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.