MOT Status
ValidMileage
95,281 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Nearside Rear light lens sharp jagged edge
Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
vehicle heavily undersealed side sills undersealed
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/ boot floor corroded (7.1.1 (a) (i))
Nearside Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear font tub mountings very corroded
Offside Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear front tub mountings very corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive wings (5.3.6 (a) (i))
Nearside Front floor pan very corroded (Requires attention)
Nearside Rear font tub mountings very corroded
Nearside Rear light lens sharp jagged edge
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive wings (5.3.6 (a) (i))
Offside Front floor pan very corroded (Requires attention)
Offside Rear front tub mountings very corroded
hand brake requires adjustment
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wings (5.3.6 (a) (i))
Nearside Rear font tub mountings very corroded
Nearside Rear light lens sharp jagged edge
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wings (5.3.6 (a) (i))
Offside Rear front tub mountings very corroded
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Registration plate lamp likely to become detached (4.7.1 (c) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wings (5.3.6 (a) (i))
Nearside Rear front tub mountings very corroded
Nearside Rear light lens sharp jagged edge
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wings (5.3.6 (a) (i))
Offside Rear front tub mountings very corroded
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Prop shaft likely to become detached Rear U/J excessively worn (6.1.7 (a) (ii)) DANGEROUS
Front Tyre worn close to legal limit/worn on edge Both Sides (5.2.3 (e))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Registration plate lamp insecure (4.7.1 (c) (i))
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Registration plate lamp insecure (4.7.1 (c) (i))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Seat belt retracting mechanism defective (7.1.2 (e))
Nearside Rear Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim too low (1.8)
Offside Rear Wheel nut(s) missing (4.2.A.1e)
Both front to rear brake pipes corroded
Front brake pipes corroded (both sides)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
How Reliable is the Great Wall Steed SE Td 4X4?
Based on 5,823 MOT tests across 510 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL12 CSV is a 2012 Great Wall Steed SE Td 4X4 in Black with a 1,996cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2012 Great Wall Steed SE Td 4X4 models, the average MOT pass rate is 69.0% with a typical mileage of 64,164 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Great Wall Steed SE Td 4X4 fails its MOT is parking brake recording little or no effort, accounting for 91 recorded failures. If you're considering buying SL12 CSV, it's worth having these areas checked by a mechanic before committing.
The Great Wall Steed SE Td 4X4 typically stays on UK roads for around 14 years. At 14 years old, this Great Wall Steed SE Td 4X4 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SL12 CSV?
You can check the full history of SL12 CSV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL12 CSV registered?
SL12 CSV is a 2012 Great Wall Steed SE Td 4X4, first registered on 14 June 2012.
Is SL12 CSV safe to buy?
The MOT history for SL12 CSV shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL12 CSV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL12 CSV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.