MOT Status
ValidMileage
161,386 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases after rear silencer - holed (6.1.2 (a))
Front Oil leak, but not excessive Gearbox oil (8.4.1 (a) (i))
Nearside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Exhaust has a minor leak of exhaust gases after rear silencer - holed (6.1.2 (a))
Front Oil leak, but not excessive Gearbox oil (8.4.1 (a) (i))
Nearside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Underside of vehicle corroded
Brake lever has insufficient reserve travel parking brake (1.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring front hanger (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring front hanger (5.3.6 (a) (i))
Rear Brake load sensing valve inoperative but ABS functioning (1.1.17 (c) (i))
Rear Brake load sensing valve linkage defective and function impaired corroded and broken from chassis (1.1.17 (a))
Rear Fuel pipe insecure stack pipe (6.1.3 (a) (i))
Rear Fuel tank insecure strap broken (6.1.3 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material to flexy hose (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive within 30 cm of tow bar mountings (5.3.6 (a) (i))
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material to flexy hose (1.1.11 (c))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive within 30 cm of tow bar mounting (5.3.6 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (5.3.6 (a) (i))
Rear Fuel Pipe/s corroded filler pipes ()
Rear seat missing at time of test
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Underside of Vehicle Corroded
Brake lever has insufficient reserve travel parking brake (1.1.2 (a))
Central Rear Registration plate lamp inoperative in the case of a single lamp or all lamps Both lamps inoperative (4.7.1 (b) (ii))
Exhaust emissions likely to be affected by an exhaust leak Emissions not caried out as rear section of exhaust missing exhaust (8.2.2.1 (b))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Brake insecure Brake load sensing valve securing bracket corroded and hanging on brake pipes (1.1.21 (c))
Nearside Rear Brake load sensing valve linkage defective and function impaired Linkages badly corroded and seized (1.1.17 (a))
Central Front Prop shaft joint so worn it is likely to fail Front prop shaft (6.1.7 (c) (ii)) DANGEROUS
Offside Rear Exhaust silencer likely to become detached Rear exhaust section missing (8.1.1 (b) (ii)) DANGEROUS
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Headlamp aim too high Lamp adjusted (4.1.2 (a))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Offside Front Headlamp aim too high Lamp adjusted (4.1.2 (a))
Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (5.3.6 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (5.3.6 (a) (i))
Vehicles internal headlight adjuster altered to recheck lights ()
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear fog lamp not working (4.5.1 (a) (ii))
Both front tyres wear on edges
Nearside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Lower Brake pipe slightly corroded To load sensing valve (3.6.B.2c)
Offside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside rear brake excessively fluctuating (3.7.B.3)
Offside rear brake excessively fluctuating (3.7.B.3)
Rear Parking brake lever has no reserve travel (3.1.6b)
Rear Upper Brake pipe excessively corroded From load sensing valve (3.6.B.2c)
Rear Upper Brake pipe excessively corroded To load sensing valve (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Toyota Hilux?
Based on 1,500,658 MOT tests across 146,528 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL12 JRO is a 2012 Toyota Hilux in Blue with a 2,494cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2012 Toyota Hilux models, the average MOT pass rate is 75.9% with a typical mileage of 77,987 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Hilux fails its MOT is fog lamp not working, accounting for 30,380 recorded failures. If you're considering buying SL12 JRO, it's worth having these areas checked by a mechanic before committing.
The Toyota Hilux typically stays on UK roads for around 39 years. At 14 years old, this Toyota Hilux is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of SL12 JRO?
You can check the full history of SL12 JRO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL12 JRO registered?
SL12 JRO is a 2012 Toyota Hilux, first registered on 30 March 2012.
Is SL12 JRO safe to buy?
The MOT history for SL12 JRO shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL12 JRO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL12 JRO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.