2007 Mazda 6

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear exhaust bracket broken

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension arm ball joint dust cover severely deteriorated Lower front arm (5.3.4 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint dust cover severely deteriorated lower front arm (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear exhaust bracket broken

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Headlamp aim too low both (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

registration plate delaminated both (6.3.1d)

Offside Rear Lower Suspension arm locating pin locking device missing (2.4.G.3b)

Center exhaust clamp corroded but not leaking.

Exhaust system corroded but not leaking.

Nearside front sill damaged.

Rear exhaust bracket snaped but exhaust still supported.

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Center exhaust clamp corroded but not leaking.

Exhaust system corroded but not leaking.

Nearside front sill damaged.

Rear exhaust bracket snaped but exhaust still supported.

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside rear brake excessively fluctuating (3.7.B.3)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Headlamp aim too high (1.8)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Headlamp aim too high (1.8)

front brake application uneven (3.7.B.2)

Clunking from base of steering column.

Rear heatshield insecure.

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

front brake application uneven (3.7.B.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)