2011 Nissan Navara

Offside Front Brake pipe corroded, covered in grease or other material After joining block (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material After joining block (1.1.11 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Exhaust has a major leak of exhaust gases flexi burst (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed at rear leaf spring mounting (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed at shocker mounting (5.3.6 (a) (i))

Rear chassis and inner sills heavily corroded / poor

Rear Chassis heavily corroded around rear suspension mountings and both chassis legs poor

Rear Exhaust mounting defective (6.1.2 (a))

Brake pedal anti-slip provision missing (1.1.2 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Bonnet cannot be secured in the closed position (3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength at front spring hanger mount (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Chassis heavily corroded around rear suspension mountings and both chassis legs poor

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear mount (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear mount (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

both chassis legs at rear corroded

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at body mount beside wheel (6.1.1 (c) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember between rear leaf springs (6.1.1 (c) (i))

Front Tyre worn close to legal limit/worn on edge offside and nearside (5.2.3 (e))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear crossmember (6.1.1 (c) (i))

both chassis legs at rear poor condition (corrosion)

Nearside Front Brake pipe excessively corroded At Flexi (1.1.11 (c))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Brake pipe excessively corroded At flexi (1.1.11 (c))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin Inner pads worn (1.1.13 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Trailer electrical socket insecure (4.10 (a) (i))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Windscreen cracked but not in drivers view

registration plate deteriorated but not likely to be misread Damaged (6.3.1d)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Windscreen cracked but not in drivers view

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

registration plate deteriorated but not likely to be misread Damaged (6.3.1d)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)