2013 Hyundai I10

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Position lamp not working (4.2.1 (a) (ii))

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Position lamp not working (4.2.1 (a) (ii))

Offside Side repeater incorrect colour (4.4.3 (a))

Rear Brakes imbalanced across an axle 33% (1.2.1 (b) (i))

Rear Outer Brake pipe excessively corroded front/rear pipe (1.1.11 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Rear Seat belt retracting mechanism defective (7.1.2 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Tyre(s) with different aspect ratios are fitted on the same axle. (5.2.3 (b))

Nearside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Tyre(s) with different aspect ratios are fitted on the same axle. (5.2.3 (b))

Windscreen washer not working (3.5 (a))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Outer Suspension arm ball joint has slight play (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim not tested (4.1.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS