MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Brake cable has wires broken and is significantly weakened (3.5.1b)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear brake application uneven (3.7.B.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Wiper blade rubbers split on ends
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
offside and nearside front jacking points corroded
Nearside Stop lamp not working (1.2.1b)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
offside and nearside front jacking points corroded
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Horn not working (1.6.2a)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Side repeater incorrect colour (1.4.A.2f)
Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both front driveshaft inner boots split
both rear shock absorber shrouds missing
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Rear Exhaust system not adequately supported (7.1.1)
both front driveshaft inner boots split
both rear shock absorber shrouds missing
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Track rod end ball joint has excessive play (2.2.B.1f) DANGEROUS
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
fuel tank straps corroding
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Stop lamp not working (1.2.1b)
Steering column universal joint has excessive play (2.1.5)
Offside Front Brake hose excessively deteriorated (3.6.B.4d) DANGEROUS
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
fuel tank straps corroding
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Registration plate lamp not working (1.1.5c)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SM02 YPD is a 2002 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 50%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying SM02 YPD, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SM02 YPD?
You can check the full history of SM02 YPD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SM02 YPD registered?
SM02 YPD is a 2002 Mercedes-benz Vito, first registered on 18 June 2002.
Is SM02 YPD safe to buy?
The MOT history for SM02 YPD shows 20 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SM02 YPD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SM02 YPD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.