MOT Status
ExpiredMileage
104,977 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front registration plate obscured (6.3.1d)
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Rear registration plate obscured (6.3.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear brake caliper has restricted free movement (3.5.1k)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
rear pads handbrake effort is minimum only
reear pads.
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Radius arm has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Radius arm has excessive play in a pin/bush (2.4.G.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Nearside Inner Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Offside Inner Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Parking brake lever has no reserve travel (3.1.6b)
Nearside Inner Front brake disc slightly pitted (3.5.1h)
Offside Inner Front brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SM03 MFA is a 2003 Mazda 323 in Silver with a 1,598cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying SM03 MFA, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SM03 MFA?
You can check the full history of SM03 MFA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SM03 MFA registered?
SM03 MFA is a 2003 Mazda 323, first registered on 26 April 2003.
Is SM03 MFA safe to buy?
The MOT history for SM03 MFA shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SM03 MFA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SM03 MFA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.