MOT Status
ExpiredMileage
74,647 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Brake fluid warning lamp illuminated (3.6.G.2)
Nearside Front Suspension arm severely distorted (2.4.G.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside rear brake excessively fluctuating (3.7.B.3)
Offside Front Subframe mounting prescribed area is fractured (2.4.A.3)
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Headlamp aim too high (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Offside front brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
lever on offside rear caliper not returning to stop
Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
front exhaust mount broken
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside front brake juddering slightly (3.7.A.2b)
Nearside rear brake juddering slightly (3.7.A.5b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
front brake discs corroded
front x/member corroded
slight bind both rear wheels
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nail in offside rear tyre
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside rear brake juddering slightly (3.7.A.5b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
front brake discs corroded
front cross/member corroded
noise at offside front wheel (inner driveshaft bearing?)
slight bind at both rear wheels
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Inner Front Brake pad(s) wearing thin (3.5.1g)
Offside Outer Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
both front tyres cracked
front brake discs corrodded
n/s/r brake sticking slightly
Offside Rear wheel bearing rough when rotated (2.6.1)
front brake discs corrodded
n/s/r brake sticking slightly
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Inner Front Brake pad(s) wearing thin (3.5.1g)
Offside Outer Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
both front tyres cracked
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
front brake discs are badly corroded
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
rear brake application uneven (3.7.B.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Vehicle fitted with wrong registration plates when presented for test - supplied & fitted proper plates as requested by customer,
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SM03 MFF is a 2003 Mazda 323 in Silver with a 1,598cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 58.3%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying SM03 MFF, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SM03 MFF?
You can check the full history of SM03 MFF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SM03 MFF registered?
SM03 MFF is a 2003 Mazda 323, first registered on 28 April 2003.
Is SM03 MFF safe to buy?
The MOT history for SM03 MFF shows 12 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SM03 MFF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SM03 MFF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.