2006 Toyota Aygo

Central Front Exhaust mounting defective (6.1.2 (a))

Central Front Subframe mounting prescribed area is corroded but not considered excessive front axle (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Central Front Exhaust mounting defective (6.1.2 (a))

Central Front Subframe mounting prescribed area is corroded but not considered excessive front axle (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output n/s & o/s (4.1.4 (b))

Offside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Rear Inner Axle swivel pins and bushes swivel pin and/or bush slightly worn n/s & o/s (5.1.2 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Registration plate deteriorated but not likely to be misread front & rear (0.1 (b))

Sub-frame corroded but not seriously weakened front & rear axle (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output n/s & o/s (4.1.4 (b))

Offside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Rear Inner Axle swivel pins and bushes swivel pin and/or bush slightly worn n/s & o/s (5.1.2 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Registration plate deteriorated but not likely to be misread front & rear (0.1 (b))

Sub-frame corroded but not seriously weakened front & rear axle (5.3.3 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output n/s & o/s (4.1.4 (b))

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced underbody (6.1.1 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Upper Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output n/s & o/s (4.1.4 (b))

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced underbody (6.1.1 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge outer edges worn (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge 2.25mm (5.2.3 (e))

Offside rear outer sill corroded and weakened

All direction indicators not working (4.4.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect headlight fogged (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect headlight fogged (4.1.2 (c))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge outer edges worn (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge 2.25mm (5.2.3 (e))

Offside rear outer sill corroded and weakened

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside rear brake binding (3.7.B.1)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside rear brake binding (3.7.B.1)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear rear brake binding (3.7.B.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)