MOT Status
ExpiredMileage
126,263 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake disc worn, but not excessively both sides (1.1.14 (a) (i))
Rear subframe components corroded
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement offside and nearside (5.3.4 (a) (i))
rear subframe and components corroded
Bodywork damaged
Front Tyre worn close to legal limit/worn on edge Both front tyres (5.2.3 (e))
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Both rear (5.3.4 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Position lamp incorrect colour (4.2.3 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside front brake binding (3.7.B.1)
Offside front brake binding (3.7.B.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside front brake binding (3.7.B.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
n/s/f tyre wall damaged
Slight damage to o/s/r tyre outer wall
Under-trays fitted obscuring some underside components
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
nsr light lens damaged
osr tyre sidewall damaged
Brakes imbalanced across an axle (3.7.B.5b)
Nearside front brake juddering severely (3.7.A.2b)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SM07 VLF is a 2007 Mazda 6 in Black with a 1,798cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2007 Mazda 6 models, the average MOT pass rate is 73.6% with a typical mileage of 75,411 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SM07 VLF, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 19 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SM07 VLF?
You can check the full history of SM07 VLF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SM07 VLF registered?
SM07 VLF is a 2007 Mazda 6, first registered on 29 March 2007.
Is SM07 VLF safe to buy?
The MOT history for SM07 VLF shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SM07 VLF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SM07 VLF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.