MOT Status
ExpiredMileage
111,815 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Front subframe corroded
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Central Front subframe corroded
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Bushes Perished (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded Both N/S and O/S (5.3.1 (b) (i))
Nearside Outer Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced Sill Holed Along Length of Vehicle (6.1.1 (c) (i))
Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill Holed Along Length of Vehicle (6.1.1 (c) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Bushes Perished (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded Both N/S and O/S (5.3.1 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced Full Underside at Rear Both N/S and O/S (6.1.1 (c) (i))
Central Rear Brake pipe corroded, covered in grease or other material from o/s to n/s at fuel tank (1.1.11 (c))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive turret top (5.3.6 (a) (i))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sills (6.1.1 (c) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive turret top (5.3.6 (a) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sills (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced at both sides at suspension points (6.1.1 (c) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced both outer sills holed (7.1.1 (a) (i))
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material All remaining steel. (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS
Nearside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS
Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material All remaining steel. (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Temp repair on n/s/f door mirror, no sharp edges
Nearside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Temp repair on n/s/f door mirror, no sharp edges
Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Vehicle underside corroded but solid.
Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Registration plate lamp not working (1.1.C.1d)
Vehicle underside corroded but solid.
Brake pipe slightly corroded All remaining steel (3.6.B.2c)
Nearside Rear Nail in tyre ()
Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside rear brake binding (3.7.B.1) DANGEROUS
Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
rear brake application uneven 60 % (3.7.B.2) DANGEROUS
Brake pipe slightly corroded All remaining steel (3.6.B.2c)
Nearside Rear Nail in tyre ()
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Front Sub-frame rubber bush deteriorated but not resulting in excessive movement Both (2.4.G.2)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Both Rearmost. (2.4.G.2)
Front to rear brake pipes plastic coated making close inspection difficult.
O/S/F Brake slight bind but not enough to effect brake test.
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
slight corrosion on front brake discs
slight roughness in offside rear wheel bearing
o/s/r wheel bearing slightly noisey
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s/r wheel bearing slightly noisey
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SM08 MHN is a 2008 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SM08 MHN, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SM08 MHN?
You can check the full history of SM08 MHN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SM08 MHN registered?
SM08 MHN is a 2008 Toyota Aygo, first registered on 30 April 2008.
Is SM08 MHN safe to buy?
The MOT history for SM08 MHN shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SM08 MHN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SM08 MHN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.