2008 Mazda 2

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp aim unable to be tested Due to incorrect image (4.1.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting point (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Shock absorbers insecurely attached Mounting top broken (5.3.2 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting point (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Unable to check headlight level device

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone bush front and rear both sides (5.3.4 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Undersurface Undersealed

Nearside Front Headlamp insecure (4.1.1 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone bush front and rear both sides (5.3.4 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sills both sides (6.1.1 (c) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

front 0/s n/s discs worn /slight det f/r susp r/bushes/exhaust rusty/f/r susp sub frames rusty/f/r b/hoses rusty/tank straps rusty/slight BIND front 0/s n/s wheels REQ ATTENTION

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

front 0/s n/s discs worn /slight det f/r susp r/bushes/exhaust rusty/f/r susp sub frames rusty/f/r b/hoses rusty/tank straps rusty/slight BIND front 0/s n/s wheels REQ ATTENTION

Under-trays fitted obscuring some underside components

exhaust rusty