2009 Fiat Grande Punto

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill marked with chalk (6.1.1 (c) (i))

Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Brake pipe excessively corroded over axle marked with chalk (1.1.11 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill marked with chalk (6.1.1 (c) (i))

Offside Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Position lamp not working side light (4.2.1 (a) (ii))

Offside Front Side repeater incorrect colour (4.4.3 (a))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill marked with chalk (6.1.1 (c) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front wing damaged at bottom

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive sump (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Vehicles internal headlight adjuster altered to recheck lights ()

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

boot difficult to unlock and open

Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

boot difficult to unlock and open

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Stop lamp(s) non-obligatory stop lamp not working High Level (4.3.1 (a) (ii))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front both tyres worn on edge

Front exhaust minor leak ( front joint)

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear silencer outer casing corroded

heat shield missing - no risk of fire

Emissions not tested (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak at flexi (8.2.1.1 (b))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front both tyres worn on edge

Front exhaust minor leak ( front joint)

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear silencer outer casing corroded

heat shield missing - no risk of fire

Rear both tyres starting to perish/crack

Windscreen has damage to an area less than a 10mm circle within zone 'A' slight scratches (8.3.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear both tyres starting to perish/crack

Windscreen has damage to an area less than a 10mm circle within zone 'A' slight scratches (8.3.1a)

n/s/r upper sidelight inoperative

exhaust tailbox outer casing slightly deteriorated

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

rear exhaust silencer corroded

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

rear exhaust silencer corroded

slight oil leak from gearbox turrit oil seal