2009 Honda Accord

Electrical wiring insecure and connectors likely to become disconnected Positive battery terminal (4.11 (a) (ii))

Front Registration plate does not conform to the specified requirements Plate damaged and part missing (0.1 (d))

Nearside Front Seat belt retracting mechanism defective (7.1.2 (e))

Nearside Rear Seat belt retracting mechanism defective (7.1.2 (e))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Hydraulic brake calliper inadequately mounted Retaining device missing (1.1.16 (c) (i))

Offside Front Seat belt retracting mechanism defective (7.1.2 (e))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pedal wearing smooth (1.1.2 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Rear quarters corroded including subframe mounting area (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pedal wearing smooth (1.1.2 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Rear quarters corroded including subframe mounting area (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn upper control arm (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake pedal wearing smooth (1.1.2 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced area above and around subframe (6.1.1 (c) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

outer arches of vehicle corroded but not likely to cause injury

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)