2011 Citroen Relay

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity (4.2.3 (b) (ii))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Exhaust has a minor leak of exhaust gases in poor condtion (6.1.2 (a))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

all discs are rusty with sitting parked up

Exhaust has a minor leak of exhaust gases in poor condtion (6.1.2 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

all discs are rusty with sitting parked up

Central Exhaust has a minor leak of exhaust gases exhaust silincer + system corroded (6.1.2 (a))

Front Direction indicator slightly discoloured both sides (4.4.3 (a))

Rear Shock absorbers has slight external damage to the casing both sides (5.3.2 (b))

Central Exhaust has a minor leak of exhaust gases exhaust silincer + system corroded (6.1.2 (a))

Front Direction indicator slightly discoloured both sides (4.4.3 (a))

Rear Shock absorbers has slight external damage to the casing both sides (5.3.2 (b))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Service brake excessively binding both sides (1.2.1 (f))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central exhaust corroded + slight blow

Central exhaust rubbers split

exhaust system corroded

Front Service brake excessively binding both sides (1.2.1 (f))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Side repeater incorrect colour (4.4.3 (a))

Windscreen washer not working (3.5 (a))

Central exhaust rubbers split

exhaust system corroded

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Exhaust mounting defective rubbers all (6.1.2 (a))

Rear hand brake travel

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Exhaust mounting defective rubbers all (6.1.2 (a))

Rear hand brake travel

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Oil leak ()

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin both (3.5.1g)

coolant leak at front of engine

engine oil level very low

Nearside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) wearing thin both (3.5.1g)

coolant leak at front of engine

engine oil level very low

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)