2002 Jaguar X-type

Oil leak, but not excessive (8.4.1 (a) (i))

general corrosion

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

general corrosion

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

fuel filler neck and breather pipes corroded

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Outer Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp aim too low (1.8)

Nearside Seat belt anchorage prescribed area is excessively corroded outer & inner sill at floor (5.2.6)

Nearside Seat belt anchorage prescribed area is inadequately repaired repaired with filler (5.2.6)

Offside Brake pipe excessively corroded inner front to rear (3.6.B.2c)

Offside Front Outer Brake pipe excessively corroded (3.6.B.2c)

Offside Outer Brake pipe excessively corroded front to rear (3.6.B.2c)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Suspension arm corroded and seriously weakened (2.4.G.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Wheel nut(s) missing all four wheels have nuts missing (4.2.A.1e)

registration plate fitted to the front does not have black characters on a white background (6.3.2a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Tyre worn close to the legal limit (4.1.E.1)

Front Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Registration plate lamp not working (1.1.C.1d)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Coil spring not correctly located (2.4.C.2)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s rear tyre side wall cut

Nearside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)