2006 Ford Galaxy

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear inner sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear sills (5.3.6 (a) (i))

Suspension arm corroded and seriously weakened Both rear trailing arms (5.3.3 (b) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear inner sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear sills (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen washer not working (3.5 (a))

Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Position lamp not working (4.2.1 (a))

Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Direction indicator incorrect colour (1.4.A.2f)

Nearside Front coil spring broken (2.4.C.1a)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear subframe and associated parts corroded

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear exhaust corroded .

Offside Front Front position lamp(s) not working (1.1.A.3b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear brake pads getting low .rear exhaust corroded .

bonnet cable snapped

bonnet cable damaged,modified to open by other means

Offside Rear Direction indicators slightly discoloured (1.4.A.2f)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nail in nearside rear tyre

Offside Rear Direction indicators slightly discoloured (1.4.A.2f)

Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)