2009 Ford Ka

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Upper Suspension component attachment bracket/mounting insecure and impairing directional stability strut top mounting (5.3.3 (a) (ii)) DANGEROUS

Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Upper Suspension component attachment bracket/mounting insecure and impairing directional stability strut top mounting (5.3.3 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Axle deformed but serviceable corroded (5.1.1 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust system insecure Centre bracket (6.1.2 (a))

Headlamp aim too low Both (4.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn Pin in to hub (5.3.4 (a) (i))

Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust has a minor leak of exhaust gases Flexi (6.1.2 (a))

Front Service brake binding but not excessively Bind (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

child seat fitted

oil leak

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Front Suspension arm ball joint excessively worn both (5.3.4 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

child seat fitted

oil leak

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Macpherson strut mounting corroded and seriously weakened upper mount (5.3.3 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake pipe excessively corroded exposed part to cyl (1.1.11 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Macpherson strut mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush excessively worn rearmost bush (5.3.4 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Tyre worn close to the legal limit both front (4.1.E.1)

Tyre worn close to the legal limit both front (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Tyre worn close to the legal limit both front (4.1.E.1)

Tyre worn close to the legal limit both front (4.1.E.1)

coil spring corroded x4 (2.4.C.1b)

exhaust system corroded

Front Headlamp aim too low (1.8)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Braking system leaking wheel cylinder (3.6.A.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

coil spring corroded x4 (2.4.C.1b)

system corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

all tyres slightly cracked

exhaust corroded slightly