MOT Status
ValidMileage
121,040 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Lower Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Items removed from driver's view prior to test
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
steering slight knocking
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside front brake binding (3.7.B.1)
Nearside rear brake binding (3.7.B.1)
Offside front brake binding (3.7.B.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
front brake application uneven (3.7.B.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Tyre worn close to the legal limit both (4.1.E.1)
Child seat fitted not allowing full inspection of adult belt
Front Brake pad(s) wearing thin (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Headlamp aim too low (1.8)
Offside Front Headlamp aim too low (1.8)
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SM59 FSF is a 2009 Hyundai I10 in Grey with a 1,248cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2009 Hyundai I10 models, the average MOT pass rate is 76.7% with a typical mileage of 43,653 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying SM59 FSF, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 17 years old, this Hyundai I10 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SM59 FSF?
You can check the full history of SM59 FSF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SM59 FSF registered?
SM59 FSF is a 2009 Hyundai I10, first registered on 24 November 2009.
Is SM59 FSF safe to buy?
The MOT history for SM59 FSF shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SM59 FSF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SM59 FSF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.