2010 Subaru Legacy

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement starting to deteriorate all bushes (5.3.4 (a) (i))

sills corroded

Central Rear Seat belt buckle missing (7.1.2 (d))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Body, Chassis + Suspension components corroded

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Exhaust mounting defective backbox (6.1.2 (a))

Nearside Rear Brake hose ferrule excessively corroded +2nd brake flexi too caliper (1.1.12 (f) (i))

Nearside Rear Brake hose ferrule excessively corroded +2nd flexi too caliper (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Sub-frame corroded but not seriously weakened coverd in under seal,+both rear inner sills corroded (5.3.3 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)