MOT Status
ValidMileage
115,565 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Play in steering rack inner joint(s) ()
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake hose has slight corrosion to ferrule Both. (1.1.12 (f) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened All arms (5.3.3 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Exhaust heat shield damaged and inscure
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened All arms (5.3.3 (b) (i))
Coil spring corroded all (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
fuel pipes corrded
shock absorbers corroded
subframe and axel corroded
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Coil spring corroded all (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
fuel pipes corrded
shock absorbers corroded
subframe and axel corroded
sump cooroded
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front exhaust flexy deteriorated
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
both sides outer sill covered trim not allowing full inspection
hand brake has reserve travel
underbody corroded
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front exhaust flexy deteriorated
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
both sides outer sill covered trim not allowing full inspection
hand brake has reserve travel
underbody corroded
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim not tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Service brake excessively binding pads and disc showing signs of excessive heat, pads crumbling around edges, uneven wear with opposite side (1.2.1 (f))
Offside Rear Shock absorbers has a serious fluid leak upper mounting corroding also (5.3.2 (b))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front suspension subframe and various components slightly corroded
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Parking brake lever defective but can be satisfactorily operated may require more than one attempt to apply (1.1.6 (d))
Rear Exhaust has a minor leak of exhaust gases rear section joint has a slight leak (6.1.2 (a))
Rear both rear shock absorbers upper mountings slightly corroded
Rear full rear suspension subframe and all connected suspension components are corroded but not excessive or seriously weakened at present
fuel tank filler pipes slightly corroded
inside of windscreen not in a clean condition, items moved from drivers view
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
under trays fitted
Parking brake: efficiency below requirements (3.7.B.7)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SM61 SRY is a 2011 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2011 Mazda 3 models, the average MOT pass rate is 77.9% with a typical mileage of 64,021 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying SM61 SRY, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 15 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SM61 SRY?
You can check the full history of SM61 SRY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SM61 SRY registered?
SM61 SRY is a 2011 Mazda 3, first registered on 29 December 2011.
Is SM61 SRY safe to buy?
The MOT history for SM61 SRY shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SM61 SRY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SM61 SRY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.