MOT Status
ValidMileage
61,237 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Macpherson strut corroded but not seriously weakened both sides (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Suspension arm corroded but not seriously weakened axle beam (5.3.3 (b) (i))
Front Macpherson strut corroded but not seriously weakened both sides (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Suspension arm corroded but not seriously weakened axle beam (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear axle corroded
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear axle corroded
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SM62 ZBZ is a 2013 Hyundai I10 in Grey with a 1,248cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 73.3%.
Across all 2013 Hyundai I10 models, the average MOT pass rate is 78.1% with a typical mileage of 35,671 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying SM62 ZBZ, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 13 years old, this Hyundai I10 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SM62 ZBZ?
You can check the full history of SM62 ZBZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SM62 ZBZ registered?
SM62 ZBZ is a 2013 Hyundai I10, first registered on 28 January 2013.
Is SM62 ZBZ safe to buy?
The MOT history for SM62 ZBZ shows 15 tests with a 73.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SM62 ZBZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SM62 ZBZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.