2002 Mazda Bongo

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Play in steering rack inner joint(s) ()

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Spare tyre defective ()

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Headlamp aim unable to be tested no light output (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear fog lamp does not emit a steady red light (4.5.4 (a))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Play in steering rack inner joint(s) ()

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Spare tyre defective ()

Nearside Front Suspension arm ball joint has slight play ball joint has slight play in (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play ball joint has slight play in (5.3.4 (a) (i))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint has slight play ball joint has slight play in (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play ball joint has slight play in (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outrigger (5.3.6 (a) (i))

Rear fog lamp does not emit a steady red light (4.5.4 (a))

Rear fog lamp switch insecure (4.5.3 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin very close to limit (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear outer sill corroded not within prescribed area

Rear Brake pad(s) wearing thin very close to limit (1.1.13 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

underneath of vehicle generally rusty

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and outrigger (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect bulb in wrong?? (4.1.2 (c))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

underneath of vehicle generally rusty

All tyres perished

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Offside Rear Rear fog lamp obviously incorrectly positioned lens has melted from inside (1.3.2a)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Offside Rear fog lamp missing (1.3.2a)