2004 Subaru Impreza

Brake performance unable to be tested (1.2.1 (g))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Headlamp light source and lamp not compatible hid bulbs (4.1.4 (c))

Nearside Rear Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch ,strut top (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Headlamp light source and lamp not compatible hid bulbs (4.1.4 (c))

Offside Rear Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill ,plate not welded (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch ,strut top (5.3.6 (a) (i))

Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Central Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember corroded and holed (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both sides inner sill (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view chip (3.2 (a) (i))

unable to check outer sills due to sill covers

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

rear suspension corroded

underside of vehicle has surface corrosion in various places

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor to wheel arch inner (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor to inner wheel arch (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

both outer sills covered by plastic coves

corrosion to rear suspension and diff housing

underside of vehicle has corrosion in various places

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

underside of vehicle has corrosion to so suspension parts and front and rear sub frame

uneven wear to both front tyres

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pipe slightly corroded all (3.6.B.2c)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front brake disc slighley pitted

park brake only just met at 17%

rear axle/diff support bar to floor mounting corroded

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear coil spring corroded (2.4.C.1b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened inner face (3.5.1i)

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Direction indicator has less than 50% of the light sources illuminating (1.4.A.2c)

Front Headlamp aim too low (1.8)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

side skirts fitted

under side corrosion

Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

both inner faces of rear brake discs in poor condition

Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen washer provides insufficient washer liquid (8.2.3)

both inner faces of rear brake discs in poor condition

Front Brake pad(s) wearing thin (3.5.1g)

both front tyres wearing on inside edges

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high and too far to the right. (1.8)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front tyres wearing on inside edges

Slight surface corrosion on ns and osr inner sill area.

Front position lamp(s) not working (1.1.A.3b)

Slight surface corrosion on ns and osr inner sill area.

Front registration plate incorrect (6.3.1a)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear brake disc excessively pitted (3.5.1h)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Rear registration plate incorrect (6.3.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)