2005 Peugeot 807

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Macpherson strut damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Macpherson strut damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Stop lamp(s) switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Stop lamp(s) switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Front Shock absorber has slight corrosion to the casing both (2.7.2a)

Front Fuel system component leaking (7.2.3)

Front Coolant leak ()

Front Oil leak ()

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Suspension arm has slight play in a ball joint both front lower (2.4.G.2)

center exhaust bracket broken but system still adequately supported

front brake discs worn

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Suspension arm has slight play in a ball joint both front lower (2.4.G.2)

center exhaust bracket broken but system still adequately supported

front brake discs worn

Offside Front position lamp(s) not working (1.1.A.3b)

Front Power steering component(s) has slight seepage from a component (2.3.3b)

Front bottom sub-frame bolt broken but adeqoutly supported.

Oil leak

Rear axle bush wearing out.

Rear exhuast box detuorating.

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Power steering component(s) has slight seepage from a component (2.3.3b)

Front bottom sub-frame bolt broken but adeqoutly supported.

Oil leak

Rear axle bush wearing out.

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear exhuast box detuorating.

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front tyres worn bald on edges

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

offside rear brake disc slightly pitted

Offside Rear brake disc slightly pitted (3.5.1h)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)