2008 Jaguar Xf

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Sill covers fitted

Underbody trays fitted

Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Sill covers fitted. Unable to check for corrosion.

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Sill covers fitted. Unable to check for corrosion.

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

undertray fitteed

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Sill covers fitted. Unable to check for corrosion.

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Sill covers fitted. Unable to check for corrosion.

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

undertray fitteed

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement forward most (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside sill covers fitted. Unable to check sills fully for corrosion

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement forward most (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside sill covers fitted. Unable to check sills fully for corrosion

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Sub-frame attachment bracket/mounting likely to fail corroded away (holed by corrosion (5.3.3 (b) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement forward most (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside sill covers fitted. Unable to check sills fully for corrosion

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement forward most (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside sill covers fitted. Unable to check sills fully for corrosion

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides front arms (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

both front tyres perished and cracked

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides front arms (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

both front tyres perished and cracked

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

both rear tyres below 3mm

nearside front tyre bold on inner edge and has several cuts in the side wall and tread area