MOT Status
ExpiredMileage
116,060 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
CV gaiters perished
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside front brake disc heat damaged.
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside front lower ball joint dust cover split.
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Stop lamp not working (1.2.1b)
Nearside front brake binding (3.7.B.1)
Nearside front brake juddering severely (3.7.A.2b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
CV gaiters perished
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside front brake disc heat damaged.
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside front lower ball joint dust cover split.
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
rear and centure exhust section have been repearied not replace but rae ok at the time of test
Brake pedal has insufficient reserve movement (3.3.A.5)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front subframe corroded but not exssesivly
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front subframe corroded but not exssesivly
Brake performance not tested (3.7.A.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front brake disc excessively scored (3.5.1h)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Both front brake discs rusted.
Both offside rear metal brake pipes rusted.
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper blade deteriorated (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Perodua Kenari?
Based on 26,232 MOT tests across 1,981 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SN51 FMG is a 2002 Perodua Kenari in Blue with a 989cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 2002 Perodua Kenari models, the average MOT pass rate is 73.5% with a typical mileage of 43,892 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Perodua Kenari fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,306 recorded failures. If you're considering buying SN51 FMG, it's worth having these areas checked by a mechanic before committing.
The Perodua Kenari typically stays on UK roads for around 26 years. At 24 years old, this Perodua Kenari is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SN51 FMG?
You can check the full history of SN51 FMG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SN51 FMG registered?
SN51 FMG is a 2002 Perodua Kenari, first registered on 21 February 2002.
Is SN51 FMG safe to buy?
The MOT history for SN51 FMG shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SN51 FMG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SN51 FMG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.