2002 Mitsubishi Canter

Central Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Stub axle has slight vertical movement between stub axle and axle beam (5.1.2 (c) (i))

Nearside Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake hose has slight corrosion to ferrules both front (3.6.B.4e)

Nearside Front Lower Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear hub slightly damp

Oil leak ()

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.D.3b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Stop lamp not working (1.2.1b)

Brake hose has slight corrosion to ferrules both front (3.6.B.4e)

Nearside Front Lower Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear hub slightly damp

Oil leak ()

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.D.3b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

n/sr inner tyre at 2.5mm

oil leak

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Rear Brake load sensing valve linkage stiff (3.6.E.3)

Body has slight corrosion (6.1.B.2)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Steering system slightly tight (2.2.D.1)

Vehicle structure has slight corrosion (6.1.A.1)

Centre Front Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front position lamp(s) not working (1.1.A.3b)