2014 Mazda Bongo

Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Brake pipe excessively corroded main pipe to rear (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and chassis (5.3.6 (a) (i))

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis (6.1.6 (i) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front crossmember (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner sill (5.3.6 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed and corroded, out rigger and step area (6.1.1 (c) (i))

Offside Inner Vehicle structure modified such that structural rigidity is significantly reduced sill holed and corroded out rigger and step area front to rear (6.1.1 (d) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps both bulbs (4.7.2 (a))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Fuel Pipe/s corroded

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge edge wearing (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed and corroded as marked (6.1.1 (c) (i))

Fuel Pipe/s corroded

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge edge wearing (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Fuel Pipe/s corroded front to rear

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Service brake binding but not excessively BOTH (1.2.1 (f))

Rear Service brake fluctuating, but not excessively BOTH (1.2.1 (e))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Service brake binding but not excessively BOTH (1.2.1 (f))

Rear Service brake fluctuating, but not excessively BOTH (1.2.1 (e))

Exhaust mounting defective corroded at centre (6.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Side repeater slightly discoloured (4.4.3 (a))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Inner Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% inner sidelight not working (1.1.A.3b)

Front bumper insecure

Nearside Front position lamp(s) not working (1.1.A.3b)

Front bumper insecure