2002 Fiat Scudo

Nearside Body has a sharp edge caused by corrosion OUTERSILL TWO PARTS (6.1.C.1)

Nearside Front Body has a sharp edge caused by corrosion INNERSILL (6.1.C.1)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Headlamp insecure (1.7.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake pipe excessively corroded (3.6.B.2c)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Centre Exhaust system not adequately supported (7.1.1)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp insecure (1.7.3)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake binding (3.7.B.1)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Brake cable insecure (3.5.1d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp insecure (1.7.3)

Offside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside rear brake binding (3.7.B.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Brake load sensing valve stiff (3.6.E.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Suspension arm has slight play in a ball joint (2.4.G.2)

Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

exhaust corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp aim too high (1.8)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Statutory seat belt missing (5.1.1)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Parking brake lever, pawl mechanism pivot(s) or their associated mountings locking device insecure (3.1.4b)

Rear Registration plate lamp not working (1.1.C.1d)

Front brake disc slightly pitted (3.5.1h)