2006 Toyota Aygo

Front subframe has heavy surface corrosion

Nearside Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill corroded (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Front subframe has heavy surface corrosion

Nearside Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill corroded (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Exhaust silencer insecure (8.1.1 (b) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed and corroded (6.1.1 (c) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front subframe has heavy surface corrosion

Nearside Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill corroded (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake drum worn, pitted or scored, but not seriously weakened Rubbing on backplate (1.1.14 (a) (ii))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Rear axle, front mounting point (5.3.6 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake drum worn, pitted or scored, but not seriously weakened Rubbing on rear backplate (1.1.14 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive Rear axle, front mounting point (5.3.6 (a) (i))

Rear Axle corroded

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 23% imbalance (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Brake drum worn, pitted or scored, but not seriously weakened Rubbing on backplate (1.1.14 (a) (ii))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Rear axle, front mounting point (5.3.6 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake drum worn, pitted or scored, but not seriously weakened Rubbing on rear backplate (1.1.14 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive Rear axle, front mounting point (5.3.6 (a) (i))

Rear Axle corroded

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 23% imbalance (1.2.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill holed and corroded close to suspension mounting (5.3.6 (a) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Wheel bearing rough when rotated both sides (5.1.3 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Both anti roll bar drop link bushes perished

Both bottom arm rear bushes staring to split

Both front tyres worn on inner and outer edges and close to the legal limit

Both rear shocker casings corroded

Both rear tyres perished

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front wiper torn

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)