MOT Status
ExpiredMileage
180,857 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
eml light on
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
eml light on
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER (6.1.1 (c) (i))
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))
Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER (6.1.1 (c) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front tyres cracked in tred
Nearside Rear tyre cracked in tred
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
exhaust earth strap corroded
tyre pressure monitor indicates a fault
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Front tyres cracked in tred
Nearside Rear tyre cracked in tred
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
exhaust earth strap corroded
tyre pressure monitor indicates a fault
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Headlamp aim too low (1.8)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Drag link end ball joint has slight play (2.2.B.1f)
Offside Drag link end ball joint has slight play (2.2.B.1f)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Shock absorber has a light misting of oil (2.7.3)
How Reliable is the Dodge Caliber?
Based on 69,277 MOT tests across 4,774 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SO06 OSD is a 2006 Dodge Caliber in Orange with a 1,968cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2006 Dodge Caliber models, the average MOT pass rate is 66.1% with a typical mileage of 65,485 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Dodge Caliber fails its MOT is suspension arm has excessive play in a ball joint, accounting for 3,411 recorded failures. If you're considering buying SO06 OSD, it's worth having these areas checked by a mechanic before committing.
The Dodge Caliber typically stays on UK roads for around 20 years. At 20 years old, this Dodge Caliber is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SO06 OSD?
You can check the full history of SO06 OSD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SO06 OSD registered?
SO06 OSD is a 2006 Dodge Caliber, first registered on 12 July 2006.
Is SO06 OSD safe to buy?
The MOT history for SO06 OSD shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SO06 OSD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SO06 OSD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.