2008 Toyota Aygo

Brake pipe corroded, covered in grease or other material all brake pipes (1.1.11 (c))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

covered in under seal

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sub- frame mount (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub- frame mount (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor / inner sill (7.1.1 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Outer sill slightly corroded

Offside Outer sill slightly corroded

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Outer sill slightly corroded

Offside Outer sill slightly corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bottom arm rear bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge outer shoulder (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Central Exhaust mounting defective exhaust mounting corroded (6.1.2 (a))

Offside Front brake disc worn, pitted or scored, but not seriously weakened inner face (3.5.1i)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 29% (3.7.B.5b)

Headlamp aim too low both sides (1.8)

Offside Front brake disc worn, pitted or scored, but not seriously weakened inner face (3.5.1i)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 29% (3.7.B.5b)

Nearside Rear coil spring corroded (2.4.C.1b)

Tyre tread depth below requirements of 1.6mm both front (4.1.E.1)

Nearside Rear coil spring corroded (2.4.C.1b)

Tyre worn close to the legal limit both rear treads cracked and worn (4.1.E.1)

Tyre worn close to the legal limit (4.1.E.1)

both rear tyre treads are cracking

wheel alignment reqd

FRONT BRAKE DISCS CORRODED AND WORN