MOT Status
ExpiredMileage
129,057 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing to inner sill area (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg (2.4.A.3)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Parking brake lever has no reserve travel (3.1.6b)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Child Seat fitted not allowing full inspection of adult belt ()
Front Inner Brake pad(s) wearing thin getting low (3.5.1g)
excessive corrosion to nearside floor not in a prescribed area
front brake discs worn and corroding on inner surfaces
front exhaust mounting broken but system still secure
heavy corrosion to vehicle
offside rear light lense damaged
Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
corrosion offside + nearside front floor
corrosion offside + nearside inner + outer sills
corrosion offside + nearside rear chassis
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
corrosion offside + nearside front floor
corrosion offside + nearside inner + outer sills
corrosion offside + nearside rear chassis
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pad(s) wearing thin (3.5.1g)
chassis rails corroded
exhaust system corroded
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
exhaust corroded at catalyst joint
Nearside Front Lower Front suspension has excessive movement at a suspension ball joint (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
exhaust corroded at catalyst joint
n/s/r brake binding
exhaust corroded
suspension components and subframe corroded
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
exhaust corroded
suspension components and subframe corroded
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
advance corrosion to front and rear suspension componets
advance corrosion to underside of vehicle
exhaust in poor condition needs attention
headlight aims on lower limits
stone chips in windscreen
stone chips in windscreen
BOTH FRONT BRAKE DISCS WORN
BOTH FRONT LOWER ARM,S RUSTY
Nearside Inner Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside front brake grabbing slightly (3.7.A.2b)
How Reliable is the Mazda 626?
Based on 311,592 MOT tests across 41,549 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SO51 FUJ is a 2001 Mazda 626 in Blue with a 1,991cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2001 Mazda 626 models, the average MOT pass rate is 70.9% with a typical mileage of 77,212 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 626 fails its MOT is parking brake: efficiency below requirements, accounting for 25,332 recorded failures. If you're considering buying SO51 FUJ, it's worth having these areas checked by a mechanic before committing.
The Mazda 626 typically stays on UK roads for around 37 years. At 25 years old, this Mazda 626 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SO51 FUJ?
You can check the full history of SO51 FUJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SO51 FUJ registered?
SO51 FUJ is a 2001 Mazda 626, first registered on 27 December 2001.
Is SO51 FUJ safe to buy?
The MOT history for SO51 FUJ shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SO51 FUJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SO51 FUJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.