2003 Hyundai Getz

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Nail in tyre ()

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Windscreen washer not working (3.5 (a))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Nail in tyre ()

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pipe slightly corroded both rears from flexys (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Brake pipe excessively corroded both front to rears at axel (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Brake pipe slightly corroded both rears from flexys (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Brake pipe slightly corroded both front to rear (3.6.B.2c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has a major leak of exhaust gases backbox (7.1.2)

Rear Lower engine mounting deteriorated resulting in excessive movement (6.1.D.1a)

Brake pipe slightly corroded both front to rear (3.6.B.2c)

Headlamp aim too low (1.8)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

rear brake fluctuating, but not excessively (3.7.B.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high and too far to the left. (1.8)

front tyre pressure low

slight body damage wheel arches rear rusting n/s door mirror cover broken

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

front tyre pressure low

slight body damage wheel arches rear rusting n/s door mirror cover broken

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear registration plate deteriorated (6.3.1d)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside rear door cannot be opened from the outside.