MOT Status
ExpiredMileage
71,513 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Headlamp adversely affected by the operation of another lamp (1.7.5c)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Underbody, chalked. (6.1.B.2)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Front lower arm. (2.4.G.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Underbody, chalked. (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Tyre tread depth below requirements of 1.6mm Both rear tyres. (4.1.E.1)
Both rear trailing arm bushes split but holding.
Fuel filler neck to tank pipes corroded.
Undercover blocking full inspection.
brake disc worn, pitted or scored, but not seriously weakened Both front. (3.5.1i)
vehicle underside corroded
Child Seat fitted not allowing full inspection of adult belt ()
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Child Seat fitted not allowing full inspection of adult belt ()
vehicle underside corroded
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Front position lamp(s) not working (1.1.A.3b)
Nearside Outer Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Outer Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
rear brake fluctuating, but not excessively (3.7.B.3)
Exhaust bracket at back box broken
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside rear brake fluctuating, but not excessively (3.7.B.3)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside rear brake fluctuating, but not excessively (3.7.B.3)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside front brake excessively fluctuating (3.7.B.3)
Offside Front Anti-roll bar linkage fractured (2.4.G.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high (1.8)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake excessively fluctuating (3.7.B.3)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Exhaust bracket at back box broken
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside rear brake fluctuating, but not excessively (3.7.B.3)
Noise detected at nearside front wheel
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside rear brake fluctuating, but not excessively (3.7.B.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Slight bind at both front wheels
Both front sills holed outside prescribed area
Nail in nearside rear tyre
Nearside Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside rear tyre worn on outside edge
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Brake pipe inadequately clipped (3.6.B.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Both front sills holed outside prescribed area
Nail in nearside rear tyre
Nearside Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside rear tyre worn on outside edge
Front cross member damaged
Front panel/slam panel damaged
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Bonnet cannot be secured in the closed position (8.4.1)
Front registration plate missing (6.3.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Front cross member damaged
Front panel/slam panel damaged
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Front registration plate dirty (6.3.1d)
Offside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Front brake disc excessively scored (3.5.1h)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SP05 SBU is a 2005 Mazda 6 in Silver with a 1,999cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 50%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SP05 SBU, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SP05 SBU?
You can check the full history of SP05 SBU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SP05 SBU registered?
SP05 SBU is a 2005 Mazda 6, first registered on 1 March 2005.
Is SP05 SBU safe to buy?
The MOT history for SP05 SBU shows 16 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SP05 SBU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SP05 SBU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.