2006 Volkswagen Jetta

Front Macpherson strut pin or bush worn but not resulting in excessive movement both sides top mounts (5.3.4 (a) (i))

front to rear underbody/all mechanical components covered in underseal

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Road wheel fixing missing one from each wheel (5.2.1 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides front and rear sills (5.3.6 (a) (i))

Front Macpherson strut pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

front to rear underbody/all mechanical components heavily covered in underseal

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Emissions not tested exhaust leak (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Exhaust has a major leak of exhaust gases flexi (6.1.2 (a))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

All brake discs have heavy surface corrosion

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

All brake discs have heavy surface corrosion

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Steering Warning Lamp Illuminated

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake pipe leaking on abs pump (3.6.A.1)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Tow ball/hitch not fitted at time of test

Tow ball/hitch not fitted at time of test

Under-trays fitted obscuring some underside components

Front Brakes imbalanced across an axle (3.7.B.5b)

Front front brake application uneven (3.7.B.2)

Under-trays fitted obscuring some underside components

front to rear brake pipe corroded

front to rear brake pipes covered over

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)