2008 Jinlun Jl

Exhaust noisy exhaust noise louder than normal but not excessive (8.1.1 (a))

bike still runs with ignition in OFF position & key removed

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition exhaust silencers missing from both pipes - aftermarket baffles attached but still loud (8.1.1 (a))

Front Shock absorber has negligible damping effect front suspension has no damping on return stroke - topping out (5.3.2 (b))

Horn not working horn does not work (7.7 (a))

Nearside Rear Direction indicator likely to become detached left rear indicator hanging off (4.4.1 (c) (ii))

Nearside Rear Suspension component pin or bush excessively worn rear lower shock but worn to excess causing movement on its mountings (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush excessively worn rear lower shock but worn to excess causing movement on its mountings (5.3.4 (a) (i))

Stop lamp adversely affected by the operation of another lamp stop lamp does not work from either brake control when lights are on (4.3.3 (b))

bike still runs with ignition in OFF position & key removed

Front Front wheel bearings are excessively rough (2.3.5b)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Rear Drive chain excessively loose (6.2.1d)

Drive chain slightly loose (6.2.1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

rear brake close to maximum adjustment

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front wheel bearings have excessive free play (2.3.5b)

Rear Tyre has ply or cord exposed (4.1.2a(iii)

Rear suspension bush has excessive free play (2.4.A2a(i))

Headlamp aim too high (1.6)