2008 Peugeot 107

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust has a minor leak of exhaust gases rear box (6.1.2 (a))

Front Integral body structure is corroded but structural rigidity is not significantly reduced sub frame (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Bumper insecure (6.1.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Exhaust silencer slightly loose front bracket (8.1.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material brake pipe greased (1.1.11 (c))

Central exhaust mounting broken

Offside Rear tyre has cracks in edges

Rear coil spring corroded nearside and offside (2.4.C.1b)

Central exhaust mounting broken

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear tyre has cracks in edges

Rear coil spring corroded nearside and offside (2.4.C.1b)

Registration plate lamp not working x2 (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front position lamp(s) not working (1.1.A.3b)

Exhaust system not adequately supported weld broken (7.1.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Tyre worn close to the legal limit both (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

both front brake disc's are corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Child seat fitted not allowing full inspection of adult belt

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

both front brake disc's are corroded

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside and nearside front brake discs worn.