2009 Fiat 500

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

rear beam corroded

Brake performance unable to be tested leak (1.2.1 (g))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill holed (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed (7.1.1 (a) (i))

Offside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Gearbox mounting defective stabiliser mount ()

rear beam corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Inner Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill damaged (7.1.1 (a) (i))

Plastic trims shields and guards covering some prescribed areas.

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Plastic trims shields and guards covering some prescribed areas.

Plastic trims shields and guards covering some prescribed areas.

Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill the rest of the sill has been filled poorly along the lenth of the sill (5.3.6 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle (5.3.6 (a) (i))

Position lamp not working front and rear (4.2.1 (a) (ii))

Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Headlamp aim too high (4.1.2 (a))

Plastic trims shields and guards covering some prescribed areas.

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

suspension components corroded, n/s sill corroded and full of filler, rear exhaust clamp missing, rear brake pipes and flexy ferrules corroded, front top strut mounts corroded

Front Windscreen washer not working (3.5 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases both front and rear. (7.1.2)

Offside Front tyre worn on inner edge.

Nearside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has a minor leak of exhaust gases both front and rear. (7.1.2)

Offside Front tyre worn on inner edge.

Oil leak sump pan. ()

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Rear Shock absorber has an excessively worn bush Top mount (2.7.4)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has an excessively worn bush Top mount (2.7.4)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

backbox corroded

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

backbox corroded

front discs worn