MOT Status
ExpiredMileage
105,049 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside rear parking (secondary) brake grabbing slightly (3.7.B.6b)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Stop lamp not working and offside (1.2.1b)
Nearside rear parking (secondary) brake grabbing slightly (3.7.B.6b)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Headlamp not working on dipped beam (1.7.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Stop lamp not working both (1.2.1b)
bothy rear tyres have surface cracks on tread area
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Tyre tread depth below requirements of 1.6mm both (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp aim too low (1.8)
Offside Side repeater missing (1.4.A.2b)
Offside Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.C.1d)
bothy rear tyres have surface cracks on tread area
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake lever has little reserve travel (3.1.6b)
both rear tyres cracked
Offside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
both rear tyres cracked
Brakes imbalanced across an axle (3.7.B.5b)
Rear Parking brake lever has little reserve travel (3.1.6b)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
How Reliable is the Hyundai I30?
Based on 1,479,391 MOT tests across 127,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SP10 HBE is a 2010 Hyundai I30 in Red with a 1,396cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 50%.
Across all 2010 Hyundai I30 models, the average MOT pass rate is 72.7% with a typical mileage of 62,639 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I30 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 12,383 recorded failures. If you're considering buying SP10 HBE, it's worth having these areas checked by a mechanic before committing.
The Hyundai I30 typically stays on UK roads for around 19 years. At 16 years old, this Hyundai I30 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SP10 HBE?
You can check the full history of SP10 HBE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SP10 HBE registered?
SP10 HBE is a 2010 Hyundai I30, first registered on 31 March 2010.
Is SP10 HBE safe to buy?
The MOT history for SP10 HBE shows 12 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SP10 HBE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SP10 HBE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.