MOT Status
ValidMileage
71,863 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front inner driveshaft gaiter is slightly loose on NS. Both inner driveshaft gaiters have leaked some grease
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Fuel Pipe/s corroded
Rear Shock absorbers has a reduced damping effect Both rears (5.3.2 (d))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front inner driveshaft gaiter is slightly loose on NS. Both inner driveshaft gaiters have leaked some grease
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Fuel Pipe/s corroded
Rear Shock absorbers has a reduced damping effect Both rears (5.3.2 (d))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))
Front Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Brake pipe excessively corroded both rear brakes pipes excessively corroded (1.1.11 (c))
Rear Brake pipe at imminent risk of failure or fracture both rear brakes pipes excessively corroded (1.1.11 (a)) DANGEROUS
Coil spring corroded All coil springs corroded front and rear (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Macpherson strut corroded but not seriously weakened all shock absorbers corroded front and rear on the casing (5.3.3 (b) (i))
Nearside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Lower Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Rear Suspension spring mounting prescribed area is corroded but not considered excessive both spring cups on rear axle are corroded (5.3.6 (a) (i))
General Corrosion on Underbody Components
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
General Corrosion on Underbody Components
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake lever has insufficient reserve travel (1.1.2 (a))
Front Service brake excessively binding (1.2.1 (f))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Service brake binding but not excessively both front (1.2.1 (f))
Brake pipe excessively corroded both main brake pipes rear (1.1.11 (c))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps both lamps (4.7.1 (b) (ii))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Service brake binding but not excessively both front (1.2.1 (f))
offside rear tyre badly worn inner edge
Brake pipe corroded, covered in grease or other material both rear rusty (1.1.11 (c))
Vehicles internal headlight adjuster altered to recheck lights
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SP13 NWY is a 2013 Hyundai I10 in Red with a 1,248cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2013 Hyundai I10 models, the average MOT pass rate is 78.1% with a typical mileage of 35,671 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying SP13 NWY, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 13 years old, this Hyundai I10 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SP13 NWY?
You can check the full history of SP13 NWY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SP13 NWY registered?
SP13 NWY is a 2013 Hyundai I10, first registered on 1 March 2013.
Is SP13 NWY safe to buy?
The MOT history for SP13 NWY shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SP13 NWY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SP13 NWY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.