2001 Toyota Yaris

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Seat belt anchorage prescribed area is corroded but not considered excessive both sides (7.1.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Lower Integral body structure is repaired but structural rigidity is not significantly reduced both sides (6.1.1 (d) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Suspension component corroded but not seriously weakened Axle (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Seat belt anchorage prescribed area is corroded but not considered excessive both sides (7.1.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Lower Integral body structure is repaired but structural rigidity is not significantly reduced both sides (6.1.1 (d) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Suspension component corroded but not seriously weakened Axle (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Suspension component pin or bush slightly worn both sides (5.3.4 (a) (i))

Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Exhaust noisy (8.1.1 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Exhaust noisy (8.1.1 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Parking (secondary brake) (secondary) brake grabbing slightly (1.3.1 (c))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Parking (secondary brake) grabbing slightly (1.3.1 (c))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Parking (secondary brake) grabbing slightly (1.3.1 (c))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Parking (secondary brake) grabbing slightly (1.3.1 (c))

Nearside Front Anti-roll bar synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

n/s rear inner and outer sill starting to corode

o/s and n/s front anti roll bar drop link bushes starting to deteriorate

n/s outer sill at rear starting to corrode

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

different size tyres fitted on front and rear axles

n/s outer sill at rear starting to corrode

o/s rear tyre starting to age crack

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

number plate light slightly insecure