MOT Status
ExpiredMileage
102,151 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure but not likely to fall from carrier Carrier corroded and insecure (4.13 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Headlamp aim too low (4.1.2 (a))
Headlamp levelling device inoperative (4.1.5 (a))
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Battery insecure but not likely to fall from carrier Carrier corroded and insecure (4.13 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
unable to check welding due to under seal
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
unable to check welding due to under seal
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis / inner wing (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/ inner wing (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount area (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security valance (6.2.2 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security valance (6.2.2 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vallance (5.3.6 (a) (i))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
oil leak
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front registration plate deteriorated (6.3.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear registration plate deteriorated (6.3.1d)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
oil leak
Suspension arm has slight play in a pin/bush (2.4.G.2)
registration plate deteriorated but not likely to be misread (6.3.1d)
Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement (2.4.B.2)
Nearside Front Lower Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Statutory seat belt missing (5.1.1)
n/s/f has a possible wheel bearing noise
o/s/f brake pads look low and both front brake discs are corroded
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Offside rear brake binding (3.7.B.1)
n/s/f has a possible wheel bearing noise
o/s/f brake pads look low and both front brake discs are corroded
o/s/r brake requires attention
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
offside rear tyre has a cut in tread area
How Reliable is the Fiat Ducato?
Based on 1,962,737 MOT tests across 142,446 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SP55 DOJ is a 2005 Fiat Ducato in Blue with a 2,286cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 50%.
Across all 2005 Fiat Ducato models, the average MOT pass rate is 74.6% with a typical mileage of 41,565 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Ducato fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 34,174 recorded failures. If you're considering buying SP55 DOJ, it's worth having these areas checked by a mechanic before committing.
The Fiat Ducato typically stays on UK roads for around 38 years. At 21 years old, this Fiat Ducato is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SP55 DOJ?
You can check the full history of SP55 DOJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SP55 DOJ registered?
SP55 DOJ is a 2005 Fiat Ducato, first registered on 22 September 2005.
Is SP55 DOJ safe to buy?
The MOT history for SP55 DOJ shows 24 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SP55 DOJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SP55 DOJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.