2005 Fiat Stilo

Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp insecure (4.1.1 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Indicator switch faulty n/s operation (4.4.2 (a) (i))

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Oil leak at gearbox area.

Front Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Trim fouling alternator belt.

Oil leak at gearbox area.

Rear Heat shield insecure.

Exhaust front pipe pin holed.

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre perished in tread area.

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure inner wall. (4.1.D.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust front pipe pin holed.

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre perished in tread area.

O/S Rear tyre inner wall perished.

Water pipe worn.

Wiper linkage worn.

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Inner Front Brake pad(s) insecure (3.5.1g)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front coil spring broken (2.4.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

O/S Rear tyre inner wall perished.

Water pipe worn.

Wiper linkage worn.

Rear Exhaust system not adequately supported (7.1.1)

O/S Secondary side light inop.

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f) DANGEROUS

Nearside Rear Rear wheel bearing rough when rotated (2.6.1) DANGEROUS

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

osf bumper damaged

Emissions not tested (7.0)

Front registration plate deteriorated (6.3.1d)

Front registration plate letter/figure incomplete (6.3.1c)

Nearside Front Headlamp aim too high (1.8)

coolant header tank empty/ radiator leaking heavily

osf bumper damaged

Nearside Rear Direction indicators slightly discoloured (1.4.A.2f)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Rear Direction indicators slightly discoloured (1.4.A.2f)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

n/s/f wiper blade slightly torn but clearing screen

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Direction indicators slightly discoloured (1.4.A.2f)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Rear Direction indicators slightly discoloured (1.4.A.2f)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

n/s/f wiper blade slightly torn but clearing screen

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)