2012 Toyota Hilux

All suspension components corroded

Chassis corroded all over

Chassis welded in several areas

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Obligatory mirror slightly loose (3.3 (b) (i))

Offside Sill corroded

Offside Tail light lens broken

Rear Body not fully secure Tub (6.2.2 (a) (i))

Towbar corroded

Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Prop shaft bearing has slight play (6.1.7 (b) (i))

Rear tub and mounts corroded / holed

chassis corroded and patched

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Prop shaft bearing has slight play (6.1.7 (b) (i))

Rear tub and mounts corroded / holed

chassis corroded and patched

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Prop shaft bearing has slight play (6.1.7 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

chassis heavily undersealed

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Integral body structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Prop shaft bearing has slight play (6.1.7 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Offside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Rear tub corroded / holed

Windscreen damaged but not adversely affecting driver's view cracked in black band (3.2 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Offside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Rear tub corroded / holed

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Seat belt buckle not functioning as intended (7.1.2 (d))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Seat belt buckle not functioning as intended (7.1.2 (d))

Windscreen washer not working (3.5 (a))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Horn not working (7.7 (a) (ii))

Rear Brake pipe excessively corroded all at load valve (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake pipe slightly corroded all at load valve (3.6.B.2c)

Horn not working (1.6.2a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pipe slightly corroded all at load valve (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)