2012 Hyundai IX35

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

advise underbody corrossion and all suspension components

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

advise underbody corrossion and all suspension components

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

fuel tank heat shield insecure

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both sides rear slightly perishing (5.2.3 (d) (ii))

Rear rear suspension components slightly corroded

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement TRAILING ARM BUSH (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement TRAILING ARM BUSH (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened ALL ON THE REAR BOTH SIDES (5.3.3 (b) (i))

advise rearr suspesion and rear subframe corroded

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Nail in tyre ()

advise rear hand brake effort close only 16%

advise rearr suspesion and rear subframe corroded

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Side repeater with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

advise both rear axle bushes

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

advise both rear axle bushes

Nearside Side repeater slightly discoloured (4.4.3 (a))

Brake lever has insufficient reserve travel (1.1.2 (a))

Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Nearside Side repeater light intensity significantly reduced (4.4.3 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake inoperative on one side BOTH SIDE'S VERY LOW EFFORT (1.4.1 (a))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Front wheel bearing has slight play (2.5.A.3c)